• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

loose bonnet hinges

Share this page

charlie74

charlie74

Jedi Warrior
Offline
i have my bonnet off at the moment to do some work in the engine bay, and i have found that the hinges are loose where they are mounted to the body tub. it seems that it is a fairly beefy pin that the hinge rotates on. does anyone have any fixes to tighten the slop out of the hinge?
thanks in advance.
c74
 
Charlie, there is some slop in the hinges by themselves but when bolted to your bonnet that doesn't seem to be a problem. They counteract each other in that one plane of movement.
 
so, the play in the hinges is normal then? how much should there be? i can wiggle the tops of the hinges about 1/2" in either direction.
 
If they where tight. Then you'd have ones from BMW
 
Back
Top