• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Looking for 3 items for my 65' Midget

chad

Senior Member
Offline
Hello,

My name is Chad Ward, and I am looking for 3 items for my MG Midget MKII.

The first is a "rear bearing hub for wire wheel". The hub that the bearing seats into, i need to replace one of mine. Moss Motors has it listed as part # 265-215 Bearing Hub, but is N/A right now.

The second item is the cockpit chrome trim pieces that sit above where the door latches are mounted on the body. Its not the chrome caps, but the 6 or 7 inch curved trim pieces that have the turnbuckles on them, i need both left and right pieces.

The third item i need, are the clips that have a threaded bolt on them that hold the dash pad and door top pads on. I could use about 10-15 of them. Thanks for any help finding any of these items, chad
 
If nothing more those clips for the pads are easy to make- a 10-32 x 1/2" long button head screw brazed or welded to a small square of steel and then grind the head down some. If you braze stainless steel screws on they will stay good for a long time!
Bill

Putting flats on a #10 flat washer would be an easy way to make the steel backs
 
Chad,
You have a PM
Dug
 
Back
Top