TR2/3/3A Led flasher relay?

[Lukens]

I'm sure this has been discussed, and I know "search is my friend", but I'll ask anyway:
I replaced my TR3's turn and stop lights with LED's. I installed ballast resistors to compensate for the reduced amp draw. For more than one reason, I'd like to ditch the resistors.
Can someone tell me what "LED flasher relay I need? I'm running negative ground.
TIA
Russ

 

[Gliderman8]

I bought this flasher for my TR6...
https://www.amazon.com/gp/product/B00JXLH7CG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Note: you do here the "click" of the flasher maybe once or twice after completing the turn... it doesn't bother me.

 

[TR3driver]

To work with a TR3 harness, you need a "3 terminal" flasher.

Sorry, I don't know which one is best. But unlike the later TRs, that third terminal is what drives the dash light on a TR3.

You could rewire the dash light to work with a 2 terminal, but you would need two more wires not in the original harness and a couple of diodes.

 

[Lukens]

To work with a TR3 harness, you need a "3 terminal" flasher.

Sorry, I don't know which one is best. But unlike the later TRs, that third terminal is what drives the dash light on a TR3.

You could rewire the dash light to work with a 2 terminal, but you would need two more wires not in the original harness and a couple of diodes.

Understood. After a misfires, I spoke with a tech at https://www.memotronics.com/ He was most helpful and called out #EF33RL. That being said, I haven't received it. When I do I'll post results for future member searches.