-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
KING PIN UPPER BOLT
- Thread starter bruiner
- Start date
Share this page
DrEntropy
Great Pumpkin
Offline
No "easy way" if it's been there long. Soak it repeatedly with PBBlaster over a couple days before you go further. It's one of the nastiest bolts to remove if it has never been pulled and treated with anti-seize. And it's a fifty-fifty bet you'll need new ones, so I'd say get 'em ahead of time (or if you have the kingpin "kit" they're in there). BFH is the appropriate tool, too, BTW... Some have required the "heat wrench" as the tool of last resort.
Scott_Hower
Luke Skywalker
Offline
Nope. Hacksaw or Sawzall.
tony barnhill
Great Pumpkin - R.I.P
Offline
Doc's right on point with this one...& you don't want to damage the trunnion...new ones are astronomical, used ones only indecent!
Scott_Hower
Luke Skywalker
Offline
Yeah, I know. Tried the BFH and the Oxy/Acet wrench. Still wouldn't budge. I had a spare set of trunnions about, so I sawed through the bolt on the gaps between the trunnion and the shock arm. It was coming apart one way or another.
Antisieze paste is your friend, or don't you use that either /ubbthreads/images/graemlins/devilgrin.gif
edit: in fact, I couldn't even get the trunnions off the top of the kinpins; even using a vice to try and press the bolt stub out. I think the kingpin dimple rusted fast to the bolt. I think I threw the whole mess in the bin.
Antisieze paste is your friend, or don't you use that either /ubbthreads/images/graemlins/devilgrin.gif
edit: in fact, I couldn't even get the trunnions off the top of the kinpins; even using a vice to try and press the bolt stub out. I think the kingpin dimple rusted fast to the bolt. I think I threw the whole mess in the bin.
tony barnhill
Great Pumpkin - R.I.P
Offline
Antiseize is my friend...Permatex is not! I removed 4 heads this week - every one of them had the thermostat housing glued on with Permatex! People must think they're working on Chevy's!