Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Guest! British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
**Upgrade Now** (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
~IF~ you can find an old knob and cable end, you can MacGyver a new cable. I whacked the new knob off with a Dremel, threaded the "stump" with an 8x32 die. Drilled the old hex shaft and threaded it same with a tap.
I found the pilot to MacGyver was available on one of the network web sites. I hooked up our laptop to the TV just so our sons could see what mom and I have been meant when we talk about MacGyver.
I can tell you that the choke cable that M__S shows for '69 Spridgets and up is absolutely crap quality. I replaced the cable on Bugsy with the less expensive variety, $11.85 vs. $16.95. It lasted exactly 2 months with limited driving / usage before it siezed up. I then had to go through the aggravation of replacing the cable all over again. A definite difference in the quality of the feel of the two cables as well.
I can tell you that the choke cable that M__S shows for '69 Spridgets and up is absolutely crap quality. I replaced the cable on Bugsy with the less expensive variety, $11.85 vs. $16.95. It lasted exactly 2 months with limited driving / usage before it siezed up. I then had to go through the aggravation of replacing the cable all over again. A definite difference in the quality of the feel of the two cables as well.
- For authenticty sake avoid the Moss/VB offerings.
- For performance sake avoid the Moss/VB offerings.
- Stick with the cable I'm using until I can find an authentic replacement.
I have a T-handle cable on both my cars. People enjoy telling me that they are incorrect, but I like the way they work. Easy to pull, easy to lock, and easy to see it is locked ...and ugly! :wink:
The one in the photo is for an MGB, the method for converting the cable to be 'proper' for the frogeye knob will work the same. The knobs are interchangeable.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.