• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

IRS Rebuilt

Share this page

R

r67cat

Senior Member
Offline
Finished the assembly and have the IRS installed. Used Classic Jags bronze bushings, first class, rebuilt and powder coated everything else. Not that hard a project if you take your time. Amazing how much gunk builds up after 33 years.
IRS before:
Jagrear1b.jpg

Jagrear2b.jpg

Jagrear3b.jpg

IRS after:
Jagrear1.jpg

Jagrear2.jpg

Jagrear3.jpg
 
Very nice! I still have the brake calipers to put on mine (need to get them rebuilt) then I'll be ready to install the IRS.

Cy
 
Nice photos of the rrar cage, but I am curious asto what this is out of. My '67s don't have the parking brake mechanism that yours has, but wrather a straight cable from the brake to the calipers. How well does this assembly work??

Webserve
 
This is from my 1971 series 2 OTS. The brake cable activates the mech. that presses the parking brake pads to the rotors. Simple sissor mech , work fine. Have not had a problem in the 10 years I have had the car. Rick
 
Rick,
It is interesting that they went to the leverage type mechanism after the straight pull cable of the late 60s. They must have felt they needed the extra leverage, although I haven't had any problems with the pads holding at all.

Cheers
 
Back
Top