Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Shinsen774
Jedi Warrior
Offline
The new Classic Motorsports magazine just arrived with an article about a Huffaker built MGB. I'm just settling in to read it. /bcforum/images/%%GRAEMLIN_URL%%/driving.gif
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
MGB Huffaker MGB
- Thread starter Shinsen774
- Start date
Share this page
tony barnhill
Great Pumpkin - R.I.P
Offline
Good article - not long ago, I visited Haps' garag in Greenville & spent quite a bit of time going over the car...he even had a creeper so I could get under it!
Offline
There are very few of these cars. We had one for a short pierod in San Diego. The diff arrangment is really keen.
Cheers, David.
Cheers, David.
Hap Waldrop
Yoda
Offline
This race car was a great project for restoration, it had lived a very good life through out all it's owners, including myself. It was great to be able to be the ones who got to restore it, and finally great to see the story about it. Here's a photo of me in the car in about 1987 (it was black then) in the rain at Road Atlanta.
Attachments
Offline
Thats a much later one. Our's was a MK I.
Nice picture, Hap.
Cheers, David.
Nice picture, Hap.
Cheers, David.
Hap Waldrop
Yoda
Offline
David, the article in CMS, just deals with the "single hoop" factory cars from the mid 70s, they only built 4 or those, #9 was the last one.
Here's a picture of the three time championship #11 Terry Visger drove and also a picture of #9 right after we restored it.
Although the pictures of these cars look as if they are late model rubber bumper MGBs, they are in fact early model pull handle door cars, which Huffaker preferred to work with and then made to look like later cars because that is what the factory was selling at the time, British Leyland required the cars to have the later model curved dash, so the cowl were modified to accept the later dash by welding a section of the late model cowl to the early model car.
Here's a picture of the three time championship #11 Terry Visger drove and also a picture of #9 right after we restored it.
Although the pictures of these cars look as if they are late model rubber bumper MGBs, they are in fact early model pull handle door cars, which Huffaker preferred to work with and then made to look like later cars because that is what the factory was selling at the time, British Leyland required the cars to have the later model curved dash, so the cowl were modified to accept the later dash by welding a section of the late model cowl to the early model car.
Attachments
Offline
Thanks, Hap. The one that was here had pull handles, but no rubber bumpers. They must have been removed at some point? This was back in the mid 80's, and the car was sprayed white.
Cheers, David.
Cheers, David.
Hap Waldrop
Yoda
Offline
Jack_Long said:
Thanks Jack, trust me it was a tough decision back then, selling that car was one of the biggest regrets of my life, but in the end, it saved it, which is more than can be said for the rest of the single hoop Huffaker MGBs.
Monkeywrench
Jedi Trainee
Offline
Hap, The one for sale in Kansas appears to be reversible? No?
Hap Waldrop
Yoda
Offline
Thanks Skip.
Bob, the one in Kansas belongs to Rick Estes and it is the orginal #11. #11 has benn cut on and converted to coil overs and also suffered a pretty hard crash at Riverside in the late 80s. Rick want like $30 for the car and I estimate the restoration would be atleast $75K, so it's doable for someone with skills or deep pockets, I would love to get that job. The #10 belongs to Don Dickey now, and it could be restored as well, it's still has lever shocks all the way around, but it too would be alot more work than the #9 to restore. The #48 Dr. Gienger car is now raced by Gerry Lamb in the SCCA, it's very nice and in good shape, of course Gerry have coil overed it and made many change to stay competitive in SCCA racing, but it too could go back. The unique thing about #9 is that is was so close to original and in so good of shape that made for a prfoessional restoration at half the price of what the others would cost, but all of them can be made back original.
Bob, the one in Kansas belongs to Rick Estes and it is the orginal #11. #11 has benn cut on and converted to coil overs and also suffered a pretty hard crash at Riverside in the late 80s. Rick want like $30 for the car and I estimate the restoration would be atleast $75K, so it's doable for someone with skills or deep pockets, I would love to get that job. The #10 belongs to Don Dickey now, and it could be restored as well, it's still has lever shocks all the way around, but it too would be alot more work than the #9 to restore. The #48 Dr. Gienger car is now raced by Gerry Lamb in the SCCA, it's very nice and in good shape, of course Gerry have coil overed it and made many change to stay competitive in SCCA racing, but it too could go back. The unique thing about #9 is that is was so close to original and in so good of shape that made for a prfoessional restoration at half the price of what the others would cost, but all of them can be made back original.