• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Hood Stick Cover

Skidude

Member
Country flag
Offline
I have a new hood stick cover for my 59 TR3A. The hood stick cover has 2 attachment points that appear to need to attach to a lift the dot peg underneath to provide that neat folded over appearance look. My car doesn't have any pegs for this attachment.

Where do the pegs need to be placed (and how) for this hood stick cover to be properly mounted?

Photos would be greatly appreciated.
 
Look at post #90 here:


Your car likely has the holes for the studs, but some PO removed them and didn't put them back.
 
Here's a couple of photos that may offer clues (car is long gone, still have the pix). As noted, the holes may already be there once you know where to look. The female LTD is sort of upside down and backwards.

TR3 Stick Cover 1.JPG



TR3 Stick Cover 2.JPG
 
Back
Top