• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Hobrect Roll Bars and Stuff

Share this page

bugedd

bugedd

Jedi Knight
Country flag
Offline
I had my Hobrect roll bar refinished and wanted to keep it looking original, so I had the sticker recreated. If anyone could use it, I can send the image over for reprint. Turned out good considering the beat up original they had to work with!
Hobrect.jpghobrecht2.jpg
 
Ya, its pretty good, had to recreate it!
 
Could you provide some pictures of the rollbar, preferably with the hood support in place? I'm thinking of getting one made up next Spring, and curious about vertical clearance; also how any lateral bracing is running. Thanks, Doug.
 
Here are a couple pics of the bar and the sandwich plates I had made. I'll get some pics with the hood support later when I get off work.
rollbar.jpgbackplate.jpg
 
Here's pics of the clearance with the hood support.
20161102_085141.jpg20161102_085151.jpg
 
Thanks for the photos! Do you lose any seat travel distance? Doug
 
None, the bracket mounts on the shelf behind the seats so they are uninhibited in range of motion.
 
Thanks - I should've picked that up in that the photos (and thanks again for taking the cover off and such and taking them) show that the base of the rollbar is similar to the level that the angled supports mount at. Doug
 
Back
Top