• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Post-War Other Herald rear suspension lower block installation

Share this page

H

Herald63nut

Senior Member
Offline
Hi all, any directions/tips/cautions regarding the installation of a 1/2inch rear suspension lower block for a Herald would be most appreciated.
 
I added 7/8 inch block to my Spitfire but forgot about having to add length to the camber compensator mounting bolts. I didn't change the shocks or mounts.

Have you changed the front springs?

T.T.
 
Lowering the rear but not the front? I think one would want the car mostly even, so to speak. I replaced the front spring on the Spitfire with one inch lower springs. Now the ride height is about the same front to rear.
T.T.
 
Back
Top