Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have nearly finished my chassis restoration and have two pieces left. They are coated in POR15 so they should be chassis parts. the holes in the reinforced part are tapered (the side you see). About 4 1/2" long. I have looked at various parts blow-ups and have looked at the chassis and can't seem to see where they go. This is embarrassing but can anyone tell me what (and where) these pieces are? This is off a IRS car. Bruce
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR4/4A Help indentifying these
- Thread starter bammons
- Start date
Share this page
John I looked at drawings and the car and cannot see where those whould go on the lower wishbone's. Although my pedal box is out in the shed I don't see them on the box either in drawings. The car did not have a sway bar on it when I got it but the PO had not had the car that long and he just threw it together from the previous owner's disassembly. They are obviously designed to hold something significant since they are reinforced at the hole. I will look at the possibility of sway bar brackets.
Randy - It appears to me that you are right. The aftermarket sway bar mounts do not match but in the Moss catalog under factory sway bar it looks exactly like the mounting plates there. But this is interesting - according to the Moss drawing these mounts were used on TR4's but TR4A's used a different mount (TR6 type). ???? Why do I have these on the car? I am going to speculate that a PO tried to put a TR4 sway bar on only to find it did not fit right and had to take the bar off. He also put H6 carbs on (TR4) it and a TR4 valve cover as well. Had some TR4 parts that he just had to do something with I guess. But guys, thanks for you help I was worried I had left something off. Bruce