• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

HELP #2 - rear hub / brake rebuild

Share this page

That's worth a try. Sometimes they'll self align after a short drive, but I would rather have them right before I leave the hangar.
Jeff
 
I'm not to that point yet, but I had to drift my bearings in. There was no way I could press them in. For that matter, I had to drift the hub seal as it was quite a snug fit even with grease.

I would check the cylinder. I am having to send mine back as they were the wrong design.
 
Back
Top