• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Healey 100 Chassis Dimensions

Share this page

Editor_Reid

Editor_Reid

Moderator
Staff member
Platinum
Offline
A French friend and Healey owner is looking for a schematic and dimensions of the chassis for BN1/BN2 Healeys. Can anyone direct me to a source for such a technical drawing and these measurements?

(I don't find them in the Owner's Handbooks or Service Manuals.)

Thanks.
 
I can't remember where I found this a few years ago, but I referenced it to help me decide if my chassis was straight before I fixed it up.
 

Attachments

6 cyl chassis drawing labeled as a 4 cyl chassis.
Probably close enough.

Maybe Scott would share what he put together?
www.ahexp.com

100-4 Frame dimensions : The 100 Forum : The Austin-Healey Experience

I know this has been asked before but.... I can't seem to find any prints, photos or schematic for the 100 frame . I'm trying to rebuild my frame and would love to have the correct location of the welded parts . Any help would be great
www.ahexp.com www.ahexp.com
 
Thanks for the correction Jake, I didn't check all dimensions against my chassis but the major length and width dimensions were good for the bn1. Sorry for any confusion. Here's the 100-6 dimensions which I thought i copied out of a friend''s service manual, but may downloaded ??? :unsure:
 

Attachments

Last edited:
Back
Top