Healey 100 Chassis Dimensions

[Editor_Reid]

A French friend and Healey owner is looking for a schematic and dimensions of the chassis for BN1/BN2 Healeys. Can anyone direct me to a source for such a technical drawing and these measurements?

(I don't find them in the Owner's Handbooks or Service Manuals.)

Thanks.

 

[Guido36]

Maybe Kilmartin or Jule can help on this one?

 

[RCarr]

I can't remember where I found this a few years ago, but I referenced it to help me decide if my chassis was straight before I fixed it up.

 

[Editor_Reid]

Excellent, looks very promising. Thanks Ray!

 

[Jake]

6 cyl chassis drawing labeled as a 4 cyl chassis.
Probably close enough.

Maybe Scott would share what he put together?

100-4 Frame dimensions : The 100 Forum : The Austin-Healey Experience

I know this has been asked before but.... I can't seem to find any prints, photos or schematic for the 100 frame . I'm trying to rebuild my frame and would love to have the correct location of the welded parts . Any help would be great

www.ahexp.com

 

[RCarr]

Thanks for the correction Jake, I didn't check all dimensions against my chassis but the major length and width dimensions were good for the bn1. Sorry for any confusion. Here's the 100-6 dimensions which I thought i copied out of a friend''s service manual, but may downloaded ???