• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Grose jets

Share this page

C

Coastalman

Jedi Warrior
Bronze
Offline
I have recently had installed the Grose jets on my 1275 carbs. The car does not seem to be running as good as it did with the regular jets. Is there a specific problem with the Grose jets? If so, is it correctable? I have read a few posts here that indicated the Grose jets had problems, but never had a clear idea of what those problems are. Unfortunately, I read the posts after the fact.
Thanks,
Charlie
 
Had the same problem myself (with new ones), and, yes, had the "sticky balls" problem... with overflowing bowls. Changed to Viton-tipped ones and all was just fine.
 
Charlie, as mentioned by Rick, Grose Jets have a reputation for either sticking closed or open (I've experienced both). If you want to continue to use them, remove them and soak them for a while in a bit of carb cleaner then flush them out and blow them dry with compressed air. Supposedly the balls are coated with a Cosmoline-like material to prevent them from rusting when in storage.
 
Thanks to all. Once I get a cool day here I will try cleaning them out and, if still not pleased, replace them. Where can I get the Viton-tipped jets?
Charlie
 
Viton-tipped ones are many places... including Moss. The shipping might be as much as the valves. :wink-new:
 
Back
Top