• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Grille Top Cowl Screw

Share this page

R

RestoreThemAll

Jedi Warrior
Country flag
Offline
The top cowl of the grill surround has two small screws, one on each end. See pics. I broke one thinking it needed to be removed for rechrome. Are these screws soldered in or does it just look that way because of the chrome?
 

Attachments

  • Grill Top cowl screw broken.jpg
    Grill Top cowl screw broken.jpg
    60.6 KB · Views: 135
  • Grill Top cowl screw soldered.jpg
    Grill Top cowl screw soldered.jpg
    56.4 KB · Views: 136
  • Grill Top cowl screw.jpg
    Grill Top cowl screw.jpg
    69.7 KB · Views: 130
Last edited by a moderator:
Re: Grill Top Cowl screw

Thanks Steve. It's the top piece in the attached pic. Can't be SS. Too rusty. Mine is a BJ7. That Moss diagram doesn't look right for my car.
 

Attachments

  • Grill.jpg
    Grill.jpg
    78.4 KB · Views: 142
Re: Grill Top Cowl screw

Yes, I think you're right, it's attached. Have you ever said this...I wish that I left that alone.
 
Re: Grill Top Cowl screw

"Can't be SS. Too rusty"

Working low quality stainless steel often causes imperfections to rise to the surface and rust-- it simply "stains less"....
 
The small screws on each end seem to be silver soldered in. I put cleaned it well and heated it to red hot (not cherry red, as I don't want to hurt the sheet metal). It didn't soften. Are they silver soldered? Or is it another method? Solder with nickel and chrome on top. I'm trying to soften nickel/chrome?
 
Back
Top