• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Good place for O/D trans rebuild near Detroit?

britlover

Senior Member
Offline
I have a TR4A currently undergoing a restoration, and I'm getting to the point where I should have the trans rebuilt--
Question is where? Any known reputable shops near Detroit?
Any ideas what I should expect it to cost? The Overdrive never worked, despite replacing the solenoid and relay. The lever on the trans was definitely moving, but did not engage the O/D. Also, the last time I drove it 1st gear was making some growling noises. Would I be better off sourcing a known good gearbox, or should I rebuild?
 
Welcome to the forum! -probably best to hook into the Detroit Triumph club to get some recommendations if you haven't tried yet. Not in Detroit, but people like Steve Yott near the Wisconsin/Illinois border or Ed Woods in Pennsylvania might be able to do the work or suggest someone. There is also John Esposito with Quantum Mechanics in Connecticut who makes a living at just that sort of thing.

ps. don't know the cost involved, but if it were me I'd try to find someone you trust to take a look at the box you have - it may need very little work which could wind up the cheaper route. Fully rebuilt, guaranteed od gearboxes are typically in the $2k neighborhood.
 
I have a buddy in Alabama that rebuilds overdrives, he's done two for me and some for a couple of the guys here on the Forum. Brad Orndoff in Gulf Shores.251-978-4635

Marv
 
Here's where I got mine: Quantumechanics

Not the cheapest -- possibly the most expensive -- but has been a very reliable, troublefree unit.

Not sure what exchange John would give on an OD gearbox or if he would rebuild your unit but a good guy to talk to about your options.
 
Back
Top