• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Getting off brake drum nuts

Share this page

MGretired

MGretired

Senior Member
Offline
Doing the rear brakes...drivers side nuts holding the brake drum on came off no trouble...other side won't budge. Soaked the nuts in WD-40 but still won't budge...I'm thinking the PO used an impact wrench so I guess that's what I'll need, unless someone has some wisdom to impart.. /ubbthreads/images/graemlins/confused.gif
 
When they don't come out easily, I drill 'em out...they're not necessary as the wheel will hold the drum solid in place.
 
Try PB Blaster or Kroil. Not familiar with the assembly, but heat them if possible.
Never found WD40 to be a good penetrant. These two seem to be about the best off the counter. Let them soak over night. Many people don't allow the chemicals time to work.
 
Yeah, most car's don't have 'em (the retaining screw). Just a drum held on by the wheel.

PB blaster or Kroil, and overnight to soak in... Maybe an impact driver if they're real stubborn... Don't round the heads off.
 
Drill em
 
MGretired: Are we talking about the flat head screw that holds the drum to the axle flange or the lugnuts?

Paul
 
Back
Top