• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Gasket sealers ?

Share this page

JimLaney

JimLaney

Senior Member
Offline
Novice needs to know if you all use RTV Silicone for gasket sealer and if so any particular brand that you have found to be better.
If not, what is your sealer of choice? - I'm reassembling a 1098 and need to know what to use for gasket sealer.
 
Jim,
I use Permatex Ultra Gray or Ultra Black almost exclusively on most things mechanical. I have used Hylomar on rear seals, but that’s about it.
Rut
 
Permatex Aviation gasket sealer or Indian head most places or "Three Bond" when you want stuff to stay stuck such as valve cover gasket to valve cover. Grease on the head side. Never touch the silicone stuff since I had to have a radiator disassembled and rodded out because the PO had used plenty of it. Radiator core was mostly plugged with it.

Kurt
 
Back
Top