Hawkscoach
Jedi Hopeful
Offline
gentlemen, Let me start with "I know this is dangerous"...........however, I would like to repair my existing fuel tank. It appears clean inside and is generally in good condition, with the exception of some rust on the flange on one side. I drained the tank over 3 years ago and left open at the fill and the sending unit. With No product in it and stored in a dry environment. Has anyone done this and what steps at this point should I use to make sure the big bang doesn't happen. I purchased the entire Moss clean, etch, etc. products to save the tank. I have good welding skills and would like to do this. Again, this tank was open for many years with nothing in it and I would not even have considered this if that were not the case. I am thinking that power washing with soap/water. and maybe even taking it somewhere to have it cleaned like a radiator shop may be a good idea??? Thanks in advance, Doug