Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Anyone know where I could buy just the connector that connects the gas line pipe to the tank or do I have to buy the entire pipe with the connector from one of the big 3? What size is it or what thread size...is it something that would be available from a plumbing or auto specialist?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR2/3/3A Gas tank pipe connector?
- Thread starter karls59tr
- Start date
Share this page
charleyf
Luke Skywalker
Offline
The item you are looking for is called a tubing nut ( item 60142) and can be found at TRF. You want the 5/16" ( which by the way is the same as found on the intake side of the fuel pump. It is not flared but rather uses a compression sleeve or olive to seal the pipe.
These may be available but I could not find any at our local stores.
Charley
These may be available but I could not find any at our local stores.
Charley
What does BSP stand for British..... I found a package of 5/16" ferules or "olives" at a Canadian Tire store in the brake line section and I was able to get the threaded nut from the fuel line on a 4A parts car that I have. So now I can put the3 car back on the road instead of waiting for a TRF part.
Cheers Karl:eagerness:
Cheers Karl:eagerness:
martx-5
Yoda
Offline
British Standard Pipe....then there's BSPT (tapered), BSPP (parallel), which is of course different from NPT... 55° vs. 60°....depending on size, sometimes the threads/inch are the same, sometimes not.