• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Fuel Tank Restore and install

Share this page

Basil

Basil

Administrator
Boss
Offline
I finally got around to refitting my EType gas tank. I first had the tank boiled out and coated with a rubberized tank coating to prevent rusting on the inside. Then I use glass bead media to strip the old paint and, while I know it isn't "original" I painted the tank with POR-15 to give it an extra bit of durability and rust resistance. I also applied some Road Kill sound dampening material in the boot where the tank sits.



fuel_tank-1-2.jpg
fuel_tank-3-2.jpg
fuel_tank-2-2.jpg
fuel_tank-4.jpg
fuel_tank-5.jpg
fuel_tank-2.jpg
fuel_tank-3.jpg
 
65_BRG_Sprite;bt284 said:
Looks great! Was hoping you'd get started so we could see photos/progress.
Click to expand...

Thanks, I know it's been too long since I was able to work on it, but these days I have a bit more free time.
 
One problem I discovered is that mice have eaten part of my fuel line (I had replaced the fuel line a while back with OEM type hard plastic line). Now I have to replace the fuel line again, but this time I am going to cover the line with stainless steel braiding to keep the mice from chewing it. (The mice really seem to love the fuel line material for some reason).
 
Back
Top