• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

front yoke

Share this page

tomshobby

tomshobby

Yoda
Offline
Hi all,

I am looking for a front tranny drive shaft yoke for my '74 Midget or a fix for the one I have. The one I have is rusted to deep to clean up and use. Since I am doing a ground up on this car I want to do a good fix.

Oh, the front suspension is nearly complete. Had a few things to take care of on the TR6 so it could stay on the road, rebuilt the rear suspension, axles, and hubs. So I was away from the Midget for a couple weeks. However, I did manage to get the front wheel bearing retaining nuts turned so they fit with the taper bearings now in the car.
 
Tom
Anyone who has done a Datsun tranny conversion will have a spare one of these.
If there is noone who does in your area then I will be glad to send you one.
BillM
 
I would not be susprised if Peter C dosen't have one.
 
jlaird said:
I would not be susprised if Peter C dosen't have one.
Click to expand...

I will check on that. I have been down there so much lately that I almost feel he needs a break. I do have to say he has been very helpful. The trouble is that we get to talking cars and other things and a visit can become "extended". :smile:
 
Back
Top