Hi Guys, I am probably asking about a topic that has been discussed a whole bunch of times ... here’s my story and question. I have been using an old set of wheels (48-spoke) and oversized tires ( 205 70 R15). When I setup my suspension I used the Moss bushings and set the camber to +1 degree. With the oversized tires I have gotten a lot of wear on the outer edge of tires.
Fast forward, I recently bought new MSWs (15 x 5), and 185 70 R15 tires all set to mount with a new set of hubs.
I wanted to ask for a recommendation on what the camber should be. Didn’t want to burn up the new tires.
Any suggested thoughts on things that worked for others would be really appreciated.
Thank you!
Bill
Fast forward, I recently bought new MSWs (15 x 5), and 185 70 R15 tires all set to mount with a new set of hubs.
I wanted to ask for a recommendation on what the camber should be. Didn’t want to burn up the new tires.
Any suggested thoughts on things that worked for others would be really appreciated.
Thank you!
Bill