Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
ChrisS
Jedi Knight
Offline
I just thought I would post a couple pics of the front spring hanger I made to lower the rear of the car. I cut the basic "U" shape of the plate out with a cutting disk / angle grinder. The channel is made up of three pieces of 2" wide flat stock. I bolted the plate in place and positioned the channel in the car before tack welding it up; since the rear bulkhead is angle back I took the lazy approach to figuring that out. Now I can fine tune the height with 1/4" and 1/2" aluminum plate under the axle instead of a thicker piece.
