• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Front flahers/markers

Share this page

Agreed. The put a VOM on it works. If tears are working correctly then issue is likely at the connection either at firewall or where headlights and turn signals come out of the wiring bundle on the PS by the RHD pedal box cover plate.
 
Alrighty, looks to be the wrong wires run to the wrong connectors at the socket. Switched them around and things are working out as they should be.
 
Thanks everyone for the help on this, I'm pretty lousy at electrical. It looks like that would be an easy mistake to make, I don't see any way to determine which terminal is which other than trial and error.
 
Original wiring diagram and wires would keep it straight. Other than that, your method.

Kurt.
 
nomad said:
Original wiring diagram and wires would keep it straight. Other than that, your method.

Kurt.
Click to expand...
Take that back!! The wires would stay straight but which spot on the bulb holder...probably not.

Kurt.
 
Back
Top