Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
Well I worked my butt off all week in preparation for the front end swap on my '74 B. I was up untill 11:30 every night this week preparing all the parts.
Cross member was powder coated.
Front swivels - rebuilt, primed and painted.
Shocks, blasted, primed painted.
Coil springs - GT, blasted, primed painted a pretty Red metallic
Calipers, blasted, primed painted with high heat primer and silver
GT sway bar, blasted, primed painted.
New links.
New bump stops & spacers
New bearings and seals
New cross drilled rotors
New brake pads
New brake hoses and hardware - Reused the coils around the hoses.
All urethane bushings with stainless sleeves, cross member and suspension.
New Grade 8 hardware.
Steering Rack - Cleaned painted and filled
New rack boots
New Tierod ends.
All other metal parts blasted etch primed and painted.
Tire re-balanced and front end aligned - Really neat machine.
Probably more stuff I forgot mention. There is a little touching up to do as a few scratches occured while installing. In looking at the pics, I need to add the small clamps on the boots. The body needs to be cleaned up a lot and that I'll start thinking about next.
Stops on a dime and really handles well. Took it on the highway and it runs straight and solid. Twisties are really, really nice.
Cross member was powder coated.
Front swivels - rebuilt, primed and painted.
Shocks, blasted, primed painted.
Coil springs - GT, blasted, primed painted a pretty Red metallic
Calipers, blasted, primed painted with high heat primer and silver
GT sway bar, blasted, primed painted.
New links.
New bump stops & spacers
New bearings and seals
New cross drilled rotors
New brake pads
New brake hoses and hardware - Reused the coils around the hoses.
All urethane bushings with stainless sleeves, cross member and suspension.
New Grade 8 hardware.
Steering Rack - Cleaned painted and filled
New rack boots
New Tierod ends.
All other metal parts blasted etch primed and painted.
Tire re-balanced and front end aligned - Really neat machine.
Probably more stuff I forgot mention. There is a little touching up to do as a few scratches occured while installing. In looking at the pics, I need to add the small clamps on the boots. The body needs to be cleaned up a lot and that I'll start thinking about next.
Stops on a dime and really handles well. Took it on the highway and it runs straight and solid. Twisties are really, really nice.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.