Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Bob Branson
Member
Offline
Members have been so much help I wanted to contribute by sharing my solution to the exasperating front bumper installation. After reading Barney's instructions and everything else I could find online, I was still needing a way to compress the spring bars to install the center bolt through the face bar and both spring bars.
I put the nose about a foot from a wall, put the car in first gear and with a screw jack like modern cars use, pressed against the bumper until the holes lined up. (A dental mirror helps.) The jack won't fall down, and you'll have both hands and all the time you need to get the washers and nut on the center bolt. Good idea to install the corner piece bolts at the same time while it's compressed. I know nobody asked, but I can't be the only one out here who was struggling with that infernal bumper.
I put the nose about a foot from a wall, put the car in first gear and with a screw jack like modern cars use, pressed against the bumper until the holes lined up. (A dental mirror helps.) The jack won't fall down, and you'll have both hands and all the time you need to get the washers and nut on the center bolt. Good idea to install the corner piece bolts at the same time while it's compressed. I know nobody asked, but I can't be the only one out here who was struggling with that infernal bumper.
