• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Front bumper brackets - BJ8

Share this page

S

Sparkie93

Member
Country flag
Offline
Both my cars have been popped in the front end and the bumper and brackets have been bent. How straight are the inner brackets supposed to be (with the exception of the 90 degree bend at the bumper)? I'm thinking they should be very straight. Is this correct?

Thanks,

Robert
 
Hello Robert,

You are correct.

Here's some photos of the brackets on my 64 BJ8.

Happy Motoring!
Roger
 
Thanks for the reply with the photos, Roger. They've answered my second question also on how the splash guard mounts (neither car has one). I finally got the brackets off the bumper today as they were welded on due to the threaded insert they attach to breaking loose and rotating. I'll take the brackets to work tomorrow and pound them back flat again.

Robert

PS - your car looks great.
 
Back
Top