• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR5/TR250 First drive!

Share this page

Marvin Gruber

Marvin Gruber

Yoda
Offline
Finally! I got the take the 250 out for a drive today. I had a set back with the overdrive that held me back for a couple of weeks. Overdrive is working fine, some trash in one of the valves. I wanted to make sure its mechanically good before I start on the interior. Will start on that tomorrow. Have to refurb the conv. frame as well. It drove well and seemed to have plenty of power.

Marv image.jpgimage.jpg
 

Attachments

  • image.jpg
    image.jpg
    76.7 KB · Views: 136
Very nice!

Cheers
Tush
 
Wow! Pretty car!
 
I love it Marvin, nice color. Which SU's did you use?

Nasty weather in your area, stay safe.

Wayne
 
Wayne,
those are HS6s from a Volvo. Had to swap carbs front to back because of fuel bowls, then used the origiinal 250 pedal linkage, wasn't hard to do. I like the look. Weather was below me last night, just some rain. Now to cut grass!
marv
 
Hey Marv

How is performance of the dual SUs as compared to the stock Strombergs? Is there something different about Volvo SU's as compared to the SUs we have on our TR3s and 4s?

Marvin Gruber said:
Wayne,
those are HS6s from a Volvo. Had to swap carbs front to back because of fuel bowls, then used the origiinal 250 pedal linkage, wasn't hard to do. I like the look. Weather was below me last night, just some rain. Now to cut grass!
marv
Click to expand...
 
Marvin, Volvo's work great, did a couple of TR6's over the years. The air filter was a little different with the three bolts. I have a couple left somewhere and a set of early "Z" car ones on a TR6 manifold. Think I might put one or the other on mine, the triple Weber set up will be for a performance engine that may go in the 6 at a later date. You have inspired me to get to work on my projects. The GT6/Spit will be the last for someone else until I get a few of mine out of the way.

Be assured we all think you are doing great jobs on your stuff and are keeping many of these cars on the road, Thanks Marvin.

Wayne
 
Dan,
that is valencia, car was originally the color was well. Wanted to do one with that color for years. Interior will be camel/tan.

Pat, can't say yet if there is more or less power with the SU's. Pretty sure they are same as the TR4a carbs.

Marv
 
I'll double check that tomorrow. I have another 250 that is all original. Thought they were the same. Hope its right, thats a nice bumper thats on it.

marv
 
Marv,

Looks beautiful! The overrider should be on the outside bumper bracket mount. You just need to swap the location.

Scott
 
Back
Top