• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

TR2/3/3A Engine mount

joshsibille

Freshman Member
Country flag
Offline
I have a post 60000 TR3 that I have been working on. Currently the engine and transmission are out of the car. Due to changing jobs, I will have to move a significant distance. My question is if I can drop the engine back in and secure it with the motor mounts only to transfer the car? I have already packed the transmission and don't have access to bolt it back in. Does anyone know if the motor mounts alone are enough to secure the engine in place? Car will be trailered to final destination. Trying to avoid having to roll an engine stand onto a trailer for the trip . Any advice anyone may have about the process would be greatly appreciated.
 

auprichard

Senior Member
Country flag
Offline
I once caw a transmission-less engine in a car where the owner had put a 2 x 4 across the frame and under the oil pan. But the right thing to do is put the gearbox in.
 

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Online
:iagree:
 

CJD

Yoda
Country flag
Offline
Absolutely not!

American cars mount the engine at the center of mass. If you look at the TR mounts, they are at the far front of the engine, so nothing supports the back without the tranny installed. Add to this the fact that the mounts are simple rubber lord mounts, with no back-up steel to hold the engine should the rubber tear (required in all new car mounts). If the mounts twist too much they will shear and the motor will just drop out.
 

Joel Lester

Senior Member
Country flag
Offline
Just an idea... take some 2 X 2 inch angle iron and cut it so that you could drill some holes to match the back of the engine... then take a couple more pieces to mount in the tranny mounting bolt holes. Then at 90 degree angles bolt up more angle iron running parallel to the frame. The engine is very heavy as you probably know but if you use bigger/stronger angle iron you might be able make it beefy enough. You could also use more angle iron to run perpendicular to the frame for more additional support. Might take a bit of time but I suppose you'd have to weigh the risk/benefits of unpacking the tranny which would be the most secure solution.
 
Similar threads
Thread starter Title Forum Replies Date
M TR6 TR5/6 Engine Mount/Chassis Brackets Assistance Please. Triumph 2
Bugeyze Engine mount advice please Austin Healey 9
G Wanted Packing pieces on rebound rubber engine mount Austin Healey Classifieds 0
G Packing pieces on rebound rubber engine mount Austin Healey 5
Sarastro TR4/4A Engine mount questions Triumph 7
RCarr BN1 Engine Mount rubber parts Austin Healey 4
D TR4/4A square engine mount washer necessary? Triumph 6
TulsaFred Engine Install motor mount question Spridgets 5
2billydavies TR2/3/3A what bolts should i use to mount engine on an engine stand? Triumph 13
Kleykamp Transmission/engine mount removal Triumph 4
brgrmyster GT6 GT6 Engine Mount "Spacers" - What's the Purpose? Triumph 2
L Engine Mount Thickness for Bugeye, etc. Spridgets 1
S T-Series How do we mount a TD engine on an engine stand? MG 7
Jim_Stevens Engine front mount replacement Triumph 3
glemon TR5/TR250 TR250/6 engine mount Triumph 2
M 76 Midget Engine Mount Replacement Spridgets 1
K clutch slave engine mount Triumph 13
J New engine mount set up Austin Healey 0
Tinkerman Engine Mount Spacers ?????? Triumph 10
J TR6 best way to mount the TR6 on an engine stand? Triumph 3
kyreb1862 77 RB Engine Mount Problem MG 1
B TR6 TR-6 Engine Lifting Mount Bolts - Leaking? Triumph 12
J Engine Mount replacement Triumph 14
David_K Painted engine mount buffers Austin Healey 3
D Spitfire Engine Mount replacement in a Spit... Triumph 3
Bruce Bowker Alfa Side mount engine Other Cars 4
mrv8q TR2/3/3A TR3 Water pump/Engine mount advice Triumph 2
T MGB '79 MGB engine mount replacement question. MG 0
L Engine ID British Motor Corp 2
J Can a TF engine be installed in a TD body? MG 7
K TR2/3/3A Coil against hot engine?.....relocating the coil? Triumph 11
C Engine Operating Temperature Austin Healey 21
CARSINC WANTED: 1275 Engine Spridgets 0
tinman58 TR2/3/3A Por-15 in engine block? Triumph 12
W BN4 Engine Mounts Austin Healey 2
B MGB while driving engine cuts out if I let off or push more throttle it comes right back on MG 5
nitro BJ8 Engine Design Austin Healey 1
S Spitfire Triumph Spitfire 1300 engine SU carb problem Triumph 10
G TR2/3/3A TS37903F Is my engine a TR3A engine because my starter says no. Triumph 3
Frameman 1949 Engine Misfiring & Starter Cranks Slowly When Hot Austin Healey 8
B Engine Stalls When Warmed Up Austin Healey 6
HealeyPassion AH Project: Cool Air to Engine Austin Healey 5
F Wanted BJ8 Engine Block Austin Healey Classifieds 1
R For Sale 100 engine block w/head Austin Healey Classifieds 3
R TR6 question re: Engine Oil Triumph 3
P General TR What color is original for engine parts? Triumph 7
AUSMHLY Clutch Stalls Engine Austin Healey 16
SherpaPilot TR6 Unidentified fitting on TR6 Engine Triumph 3
S TR2/3/3A "Vintage" engine analyzer tach unstable? Triumph 14
MikeAH100M High Temp Engine Miss Austin Healey 2

Similar threads

Top