• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Engine ID

Share this page

L

Lucca

Freshman Member
Country flag
Offline
Hello all,
Please help identifying the engine of the attached pictures. I was told it is a Morris engine 1958, but I can't confirm it.
 

Attachments

  • SmartSelect_20240324_164019_Drive.jpg
    SmartSelect_20240324_164019_Drive.jpg
    744.8 KB · Views: 110
  • SmartSelect_20240324_155753_Video Player.jpg
    SmartSelect_20240324_155753_Video Player.jpg
    543.8 KB · Views: 106
See if the engine plate is still there. Usually under the exhaust manifold at the front of the engine?
 
Lucca said:
Hello all,
Please help identifying the engine of the attached pictures. I was told it is a Morris engine 1958, but I can't confirm it.
Click to expand...
From the colour and rocker cover design it looks like a 1970's Datsun. These were based on BMC engines. If it was Austin Morris etc there would be something cast on the side. The B series had 1622 or 1500 and Austin or MOWOG. Can you get any photos of the side of the block?
 
From the colour and rocker cover design it looks like a 1970's Datsun. These were based on BMC engines. If it was Austin Morris etc there would be something cast on the side. The B series had 1622 or 1500 and Austin or MOWOG. Can you get any photos of the side of the block?
 
Definitely not an A or B series BMC engine, which all had manifolds on the left side. It looks suspiciously like a Morris MPJM 1.5 litre, which was used in Morris commercial vehicles up to the mid 50s, and even showed up in the MG VA in 1936 as the MPJG. It's still a bit hard to tell for certain, but I think it's good guess.
 
Devon County said:
From the colour and rocker cover design it looks like a 1970's Datsun. These were based on BMC engines. If it was Austin Morris etc there would be something cast on the side. The B series had 1622 or 1500 and Austin or MOWOG. Can you get any photos of the side of the block?
Click to expand...
Please see the attached picture.
 

Attachments

  • 20240518_163518.jpg
    20240518_163518.jpg
    3.7 MB · Views: 77
What's it in ?
I agree with the others, doesn't look "BMC" to me, possibly earlier "Morris motors", or it seems to be saying "Standard" to me, I think it's "Triumph" or maybe earlier "Standard" as in "Vanguard" !
 
Last edited:
Back
Top