• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Engine ground strap

Share this page

tmc

tmc

Senior Member
Offline
I did not find an engine ground strap on my 1959 TR3A when I took it apart, but I've read that one should be added, as with the TR4 and forward. Makes sense to me. Question is: where does it go? I don't have any examples around here to look at.
 
Hope this helps.
 

Attachments

  • 25287.jpg
    25287.jpg
    25.4 KB · Views: 350
Here's another shot, supplied by Don Elliott

DonElliott-TR3enginegroundstrap.jpg
 
Thanks for the pictures. I was thinking at the back of the engine, but I'll look at it tomorrow, to see where the "other end" goes on the chassis. It's probably logical when I physically look at it!
 
If concourse isn't a priority. Any spot on the motor to the chassis will work. Should prolly do a couple
 
The chassis end goes on the bolt that also holds the motor mount to the frame.
(Sorry, I've lost track of who took this photo. If you recognize it, please let me know.)
 

Attachments

  • 25290.jpg
    25290.jpg
    79.9 KB · Views: 290
TR3driver said:
The chassis end goes on the bolt that also holds the motor mount to the frame.
(Sorry, I've lost track of who took this photo. If you recognize it, please let me know.)
Click to expand...

After looking at it this morning, that's the conclusion I came to. It's the logical place, with the other end being on the time chain cover up front.

Thanks!
 
Back
Top