• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A early tr3 and tr2 kick panels

Share this page

S

sp53

Yoda
Country flag
Offline
Where the floor and the inner sill meet on an early tr3 and tr2 is different than how they meet on a tr3a. From what I can tell, the floor on a tr3a sits on top of the edge of the inner sill from end to end. The earlier cars start out sitting on the edge of the inner sill, but when floor meets the kick panel there is some kind of transition. I am not sure how the floor fits on the inner sill where the kick panel comes down. Does anyone have a picture of this area? Or I am I seeing the early kick pane incorrectly.

Steve
 
John thanks again for taking the time to show so much of the work. I found what I wanted and needed from the pics and now I am trying to figure out a plan. The weather is a factor here, 20 degrees this morning, but it will be 50 Saturday.

steve
 
Yeah, we woke up to 50 mph winds and 15 degrees this morning.

Looking back at some of those pictures, I remember the front floor was a bit fiddly...with some tabs going on top and others having to tuck under the side panels.
 
Back
Top