• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB-GT Dyno'd My 67 GT

Share this page

Stewart

Stewart

Darth Vader
Country flag
Offline
Finally got around to get my gt on the dyno and have it properly tuned. Ported head with Big intake valve Hans Pederson S/C cam and 123 bt tune ignition. Still on the stock boost pulley. Initial run was 105hp and 116 ft lbs at the wheels. Afterwards 112 hp and 120 ft lbs. Af ratio's were spot on with the exception of wot where it was still a bit fat. Still using the stock setup from moss.

Dyno.jpeg
 
Back
Top