• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

MGB-GT Dyno'd My 67 GT

Stewart

Darth Vader
Country flag
Offline
Finally got around to get my gt on the dyno and have it properly tuned. Ported head with Big intake valve Hans Pederson S/C cam and 123 bt tune ignition. Still on the stock boost pulley. Initial run was 105hp and 116 ft lbs at the wheels. Afterwards 112 hp and 120 ft lbs. Af ratio's were spot on with the exception of wot where it was still a bit fat. Still using the stock setup from moss.

Dyno.jpeg
 

Similar threads

Top