• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

DRILLING Square Holes

Share this page

Cottontop

Cottontop

Jedi Warrior
Offline
very cool! Though, i imagine you'd have to use that with a press that has a strong vise. I can't see using it with a hand drill ...
 
It is neat but since they already had to drill a pre-hole I think that it would be easier,faster and cheaper to just go ahead and broach the square hole.
BillM
 
Slick!
 
Yea, but can it do oval holes like I do all the time. Douh?
 
lots of stuff on it on youtube
bDJ7KYI" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
 
It's a WANKEL!!!
 
My brain hurts :crazyeyes:
 
Billm said:
It is neat but since they already had to drill a pre-hole I think that it would be easier,faster and cheaper to just go ahead and broach the square hole.
BillM
Click to expand...

That's exactly what I thought. However,if you needed a blind hole, then the broach wouldn't work.
 
Simple answer- don't design-in blind holes!! :smile:
(or- that is what my machinists keep telling me!!)
BillM
 
But them I'll need square bolts and nuts! Where am I gonna get a square tap from? :square:
 
Back
Top