• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A DR3A Wiper Motor 'spare' part!?

Share this page

S

spits

Freshman Member
Offline
Hello,
New to the forum; looks like a great site.

I've been rebuilding my Lucas DR3A (single speed) wiper motor and ended up with a 'spare part'! I've got a 1/4" I.D. toothed washer that I can't recall the source of. I'm not finding it referenced in any of the exploded diagrams or the photos that I shot before / during disassembly.

I'm thinking it may rest under the external armature end float adjustment screw, but I'm not sure.

Anybody know where it came from?

Thanks in advance.

Paul
 
Good point Jerry. I need to take a look back at the wiring harness as I removed it awhile back.
Thanks.
Paul
 
If it's like a TR4A this is a seperate wire that goes from a mounting bolt to the case and is not a part of the main wiring harness. May be different on your application. My wire is only about 8" long with loops at each end.
 
Back
Top