Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am currently restoring a BJ7 Heaely which unfortunately I did not dis-assemble. Is there a specific position for the 2 dowell bolts ( aec3487) on the bell housing ? There is a total of 7 bolts on the housing. I have restored E types and Mark2 Jags. before but a Healey is new to me.
-
Notice: If you're posting to get rid of the little man (Lucas), please post A NEW TOPIC with something meaningful. Tell us about yourself and your interest in British cars. You need not share anything too personal. NOTE: this New Member's Forum is only to introduce yourself. If you have specific questions about your little British car, please post those in the appropriate marque-related forum.
Thanks and welcome to BCF!
Basil -
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Dowell bolt position on Healey bell housing
- Thread starter bj7
- Start date
Share this page
longbridgehealey
Obi Wan
Offline
Welcome to the Forum. Post your question over on the Healey forum and I'm sure you'll get an answer.
BabaKahawa
Jedi Knight
Offline
Welcome to the group.
Take pics of your restoration.
I will look for your answer on the healey forum.
It will be nice to see pics or your restored car.
Take pics of your restoration.
I will look for your answer on the healey forum.
It will be nice to see pics or your restored car.
TR3driver
Great Pumpkin - R.I.P
Offline
I'm a Triumph guy, know nothing about Healeys. But on Triumphs with "dowel bolts", the holes they fit in are considerably tighter tolerance than the remainder of the holes. You should literally have to tap them into place.
An ordinary bolt/hole has perhaps .020" of clearance for easy assembly, while for the "dowel bolts" to be effective at maintaining alignment, they should have less than .002" of clearance.
No idea if this is a problem for Healeys, but for Triumphs there are some vendors selling the wrong bolts. The "dowel" bolts are supposed to have precision ground shanks, long enough to fit most of the way through the rear plate and bellhousing. At least one vendor is selling ordinary bolts (which as usual have slightly undersize shanks). I wound up making my own from drill rod.
An ordinary bolt/hole has perhaps .020" of clearance for easy assembly, while for the "dowel bolts" to be effective at maintaining alignment, they should have less than .002" of clearance.
No idea if this is a problem for Healeys, but for Triumphs there are some vendors selling the wrong bolts. The "dowel" bolts are supposed to have precision ground shanks, long enough to fit most of the way through the rear plate and bellhousing. At least one vendor is selling ordinary bolts (which as usual have slightly undersize shanks). I wound up making my own from drill rod.