• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Doors Finley Hung

Share this page

BlueMax

BlueMax

Jedi Warrior
Offline
Finish installing doors, on with next and final part, THE BONNET "ARDUOUS" :devilgrin:





P1040198.jpgP1040208.jpgP1040213.jpgP1040214.jpgP1040215.jpg
 
Speaking of the bonnet, what is the proper method to install it?
 
Find some friends to install. You need at least 3 people not to scratch the paint if Rear Hinged.
 
That's coming along really nice. A great inspiration to those of use just starting the restoration process.
 
HealeyRick said:
"Finley" did such a good job on the doors, I'd let him install the bonnet. :jester:
Click to expand...

Great minds think alike - I was going to post the same thing :D
 
Jim_Gruber said:
Find some friends to install. You need at least 3 people not to scratch the paint if Rear Hinged.
Click to expand...

Unfortunately, I found that out the hard way that you need at least two people even with the later Square Sprite hoods. :(

If there is a bright side, it is that the car has older paint and will be getting a respray down the road.
 
I use a block and tackle I made up from some old sailing hardware that I use to install the bonnet by myself. A center rope coming from a rafter splits into two ropes that connect to eye bolts in the fender where fender mounted mirrors once were installed. My bonnet is front hinged and nice easier to get on and off.
 
Back
Top