• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Door/scuttle rubber seals

Share this page

J

jandkellis

Member
Offline
I have received seals from Moss and have the instructions offered by Roger Moment but I am struggling to get them installed; can anyone offer suggestions for installation short of removing the doors.

I would appreciate any help.

Thanks,

Jim "Red Rover"
 
I have never put a set of those seals in.
However, Removing the door is quite simple if that allows you to install them..

! ] You need a helper to steady the door as you remove the hinge from the body.

2] Use your floor jack with a heavy cloth pad over the saddle to support the door at its
normal height during removal and relocating to a safe storage site.

Re installation is the reverse of removal:glee:
 
Back
Top