• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Door/scuttle rubber seals

Share this page

J

jandkellis

Member
Offline
I have received seals from Moss and have the instructions offered by Roger Moment but I am struggling to get them installed; can anyone offer suggestions for installation short of removing the doors.

I would appreciate any help.

Thanks,

Jim "Red Rover"
 
I have never put a set of those seals in.
However, Removing the door is quite simple if that allows you to install them..

! ] You need a helper to steady the door as you remove the hinge from the body.

2] Use your floor jack with a heavy cloth pad over the saddle to support the door at its
normal height during removal and relocating to a safe storage site.

Re installation is the reverse of removal:glee:
 
Back
Top