• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Dog leg fit

Share this page

D

dennisp

Freshman Member
Offline
Sorry to post an old question, but I could not find anything on search. My friend and I are restoring our BGTs and the red/brown dog leg patches from Moss will not fit. They are labelled Taiwan. Anyone have a problem? We have since ordered Heritage from another vendor. We assumed Moss was Heritage. Is it us or Taiwan part?
 
I have no experience with dog legs specifically, but the Taiwan fender I bought 10-15 years ago was a terrible fit. The nose wasn't even the right shape and had to be cut and re-formed by a body man.
 
I took a chance and got the VB ones expecting to need to fettle to fit. I was pleasantly surprised. No idea which supplier they were using, this was about two years ago.
 
I got the same panels you have from both VB and moss.I wound up using the arch?(at door opening) of the old panel and the remainder of the patch panel. I don't recall if it was made in taiwan or china, but I was not impressed.I did not know that heritage offered patch panels.
 
All I know is that I have heard (and found out) that the "red" panels aren't worth a crap and the "black" panels are OK. I put the red primer doglegs on my B and had to put a slit in it to stretch it open to fit. Put in a small patch to fill the slit. I am currently helping a friend restore a TR7 and he also purchased the red primer doglegs. Had to cut them in half to gain about a 1/2" in length. Filled in with a patch from an unused portion of metal from another part he ordered. He did order a rear fender patch panel that was black. It looked like it had been hammered to shape by hand and did not even look right or fit right. Do not know where he got the panels. I ordered mine from VB, I think but that was about five years ago.
 
I had a no fit problem with a Moss part and they took it back and refunded my money with no hassle. Later they replaced their supplier. If their parts don't fit, tell them about it and they will look into the matter and try to correct it. If their not told, they can't fix it!
I truly agree that a lot of the Chinese parts are of a very poor quality. But, we have to remember, their only made there because the majority of folks refuse to pay many times the price if they were made here or in the UK. Even though the mark up is probably very high on Chinese parts. JMHO. PJ
 
The red ones from taiwan don't fit well. But they do have a larger flange to get to the pinchweld.

Most of the better doglegs (black, made in UK) only wrap around the radius, but do not go to the pinchweld

But, yes, the offshore (usually red) doglegs do not fit right. But if you have enough metal by the door radius, you can trim the flange all together and weld along the seam like I did here (I used a NOS made in UK dogleg and wanted to keep the factory radius as perfect as possible.
Pass side rocker dogleg picture, finsihed product or here for all pics


Let me know if you have any questions on what/why I did what I did

Paul
 
Back
Top