-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Do we like 340# springs?
- Thread starter WALTER
- Start date
Share this page
Jim_Gruber
Yoda
Offline
Walter,
Bugsy my '68 is running same size tires, stock rims, and lowered 1/2". I did replace springs and getting the proper springs from the usual sources can sometimes be a problem. Bugsy looked like an off road Spridget as I was shipped Rubber Bumper Springs instead. After 3 tries I ordered BE Springs and things were fine after that. Now my problem occurred 8 years ago. I've heard issue may still be going on. I'm not having any issues with tires rubbing at all.
Bugsy my '68 is running same size tires, stock rims, and lowered 1/2". I did replace springs and getting the proper springs from the usual sources can sometimes be a problem. Bugsy looked like an off road Spridget as I was shipped Rubber Bumper Springs instead. After 3 tries I ordered BE Springs and things were fine after that. Now my problem occurred 8 years ago. I've heard issue may still be going on. I'm not having any issues with tires rubbing at all.
Jim_Gruber
Yoda
Offline
Walter,
I put whatever MOSS or VB Specified for BE Springs. They were stock now the lowered springs. Stock springs in the rear and I had them rearched. That helped for a little while I guess then springs settled back to their old positions over time.
I put whatever MOSS or VB Specified for BE Springs. They were stock now the lowered springs. Stock springs in the rear and I had them rearched. That helped for a little while I guess then springs settled back to their old positions over time.