• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

dielectric grease

Share this page

tahoe healey said:
Anyone use dielectric grease when putting fuses in? Sounds logical but I have never tried it.
TH
Click to expand...

Why put a dielectric which is non-conductive in a circuit that you want to have high conductivity????????
 
tahoe healey said:
Corrosion? I use it with the Lucas bullet connectors to exclude moisture.
Click to expand...

Well TH:
It would seem more feasible if U Used a conductive grease at least.
This is a dielectric [Grease] impregnated with conductive particles such as copper or gold???
Here the conductiveness is created by the added copper or gold particles.
The grease will still exclude moisture.
 
Then why isn't it used for all our connections? Seems logical but I have never heard of it. All I've heard of is the dielectric stuff. As it is described in the VB catalog, Dielectric Grease is the "magic bullet" for electrical connections of all types.
 
Keoke,

As we have already had this discussion, I don't understand why you keep promoting the use of a conductive grease for application in the Healey?

I have suggested the use of dielectric grease for use in electrical connections on the Healey but only see the use of a conductive grease as risky at best. Where a conductive grease will promote a circuit any where it may flow as a result of heat or being misplaced (as from a finger print), a dielectric grease is a non-conductive that will assist and support circuit insulation, lubricate the connector, and retard flash and corrosion. However, it will easily move aside to provide a solid electrical connection when pressure is applied as in the incursion of a connector.

I totally agree with Tahoe and suggest that conductive grease is very carefully evaluatred before use in a Healey application.

Ray(64BJ8P1)
 
As we have already had this discussion, I don't understand why you keep promoting the use of a conductive grease for application in the Healey?

I am not promoting it i would not touch it with a ten foot pole.IF there is anything that is going to collect dirt in a connection it is going to be grease.

So talk to the folks that think! Dielectric Grease is the "magic bullet" for electrical connections of all types.

Also use what ever you please.
 
Hi Keoke,

Sorry if I misunderstood your previous responses now and in the past.

All the best,
Ray (64BJ8P1)
 
RAC68 said:
Hi Keoke,

Sorry if I misunderstood your previous responses now and in the past.

All the best,
Ray (64BJ8P1)
Click to expand...

Naw "U" is OK with me --I was just trying t splain what makes a dielectric conductive as they say N if you choose to use a grease why not use a conductive one:cheers:
 
Last edited:
I use dielectric grease in wiring connectors, but don't see value in using it in a fuse box (unless the box is sealed and you pack the whole thing). I've not seen any corrosion in the stock fuse blocks, unlike the connectors where moisture can get trapped.
 
Yes, I have used a very light film of dielectric grease on all connections to the box and also no the fuse connectors. Although corrosion and rust may not be present in SoCal, the potential for its formation is definitely present in NJ and the east cost so I do everything practical to eliminate this potential.

Ray (64BJ8P1)
 
Back
Top