• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Denis Welch Header

Share this page

R

rc157

Freshman Member
Offline
A little help: if the header is 2 in and I want to use that stainless cpl from jcw, what size do I need? This is becomming a real problem trying to match it up to an Abarth system for a BJ8. Any help is appreciated
 
Hi RC,
The JCW flex pipes appear to be sized by ID. For example, a 2" ID coupler would fit over a 2" OD pipe & could be clamped or welded. The 2" appears to be available in 8, 10, 12, & 14" overall lengths. You need to verify the diameters of the pipes you plan to connect together. The couplers come in various diameters.
https://www.jcwhitney.com/autoparts/Produ...=exhaust%20flex
If your header is two out & the muffler is two in, you would need two couplers. You could shorten the header extensions to make room for the couplers.
D
 
dave russell,great info on the stainless j.c.w. stuff,just found a leak in mine will have to be replacing.seem to be resonably priced as well. /ubbthreads/images/graemlins/yesnod.gif
 
Back
Top