• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Denis Welch Header

Share this page

R

rc157

Freshman Member
Offline
A little help: if the header is 2 in and I want to use that stainless cpl from jcw, what size do I need? This is becomming a real problem trying to match it up to an Abarth system for a BJ8. Any help is appreciated
 
Hi RC,
The JCW flex pipes appear to be sized by ID. For example, a 2" ID coupler would fit over a 2" OD pipe & could be clamped or welded. The 2" appears to be available in 8, 10, 12, & 14" overall lengths. You need to verify the diameters of the pipes you plan to connect together. The couplers come in various diameters.
https://www.jcwhitney.com/autoparts/Produ...=exhaust%20flex
If your header is two out & the muffler is two in, you would need two couplers. You could shorten the header extensions to make room for the couplers.
D
 
dave russell,great info on the stainless j.c.w. stuff,just found a leak in mine will have to be replacing.seem to be resonably priced as well. /ubbthreads/images/graemlins/yesnod.gif
 
Back
Top