Convert BJ8 exhaust to single silencer

[NIB]

I have a BJ8 ph2 with stainless double silencer system, as original. If i want some more noise, can I somehow buy parts to convert it to a single silencer system with outlet in the rear left or do I have to buy a completely new system?

 

[Ed_K]

Yes NIB,

Go to a good muffler shop where they can custom bend exhaust
pipes and have them make you a couple of pipes that connect to the ends of the front silencers and then run out like this photo.

Ed

 

[Keoke]

Hi ED that is good advice. However, my experience is, most muffler shops do not have SS the ability to bend SS tubing or do stainless steel welding.

 

[tahoe healey]

You might want to bring the end pips out further to avoid discoloring the fender(wing). I've seen chrome stain from exhaust so I can only imagine what will happen to paint.

 

[NIB]

Seems like AH spares has a complete system, has anyone tested that?

Manufactured especially for A.H. Spares by Double S exhausts these performance exhausts are a straight through system which makes the two rear silencers redundant creating better ground clearance. This also provides increased exhaust gas flow. Made from high-grade stainless steel this system will definitely give you a performance and sound upgrade. Comes complete with down pipes.

 

[Bob_Spidell]

I found it here:

https://www.ahspares.co.uk/products/productdetail.aspx?GUID=0c5fc536-f455-4d0f-8f3e-2e42c712f437

Wonder what the (approx.) 18-in section of straight pipe is for?

 

[bob hughes]

Mostly, side exhausts pop out just in front of the rear wheel not behind it. If you have the right size pipes at the muffler under the seat, it is just a matter of buying in a side exit that fits directly to the muffler.

Bob