• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Coil Wiring

Share this page

Griz

Griz

Jedi Hopeful
Offline
I think I got this figured out, but need confirmation. On my positive ground system the solid white wire goes to the negative (old SW) terminal and the white with black tracer goes to the positive (old CB) terminal on a new coil...correct?

Griz
 
Griz said:
I think I got this figured out, but need confirmation. On my positive ground system the solid white wire goes to the negative (old SW) terminal and the white with black tracer goes to the positive (old CB) terminal on a new coil...correct?

Griz
Click to expand...


The white wires are connected to SW and the white/black tracer to CB. Also an interesting link to Lucas sports coil history!

https://www.bobine.nl/jaguar/13-electrical/lucas-sports-coil/

Capture88.jpg
 
Thanks Duane, but I guess what I'm really asking, is the CB terminal the positive, and is the SW the negative?244.jpgAnd if so, then the wires are incorrectly connected on the attached photo.
 
The wiring diagram is correct.
CB = Contact Breaker = points in distributor
SW = Ignition SWitch
If your coil is marked "+" and "-", the "+" is connected to distributor and the "-" to the ignition switch, for positive ground cars.
 
Back
Top