• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

T-Series clutch slave

Share this page

J

jjh

Member
Offline
Just completed rebuild with Moss kit. have not re-installed yet. When I push the piston in ,it does not return. Is this because there is no fluid in the cylinder or do I have a problem?
 
maybe a stupid question, but did you remember to put the spring back in there? When I rebuilt mine, I made sure there was lots of brake fluid in there when I put the seal back, and it would return, not with any great force, but it would bring itself back out.
 
Definitely should have a spring & come back out a little.
Other than the nut & washer in the middle this is the way it came out. The nut & washer are for the hose to body.
ef1a.jpg
 
Back
Top